Products

Process Media

TOYOPEARL HW-40S

TOYOPEARL HW-40S resin is a hydroxylated methacrylic polymer for size exclusion chromatography. TOYOPEARL HW-40S resin has a 5 nm pore size and a 30 µm bead size. Surface hydroxyl groups render this resin very hydrophilic, therefore minimal non-specific adsorption occurs, making the TOYOPEARL HW-40S resin useful for protein separations. TOYOPEARL HW-40S is typically used for size exclusion chromatographic separations of molecules though it can also be used for buffer exchange operations and to remove surfactants such as Triton X100 from protein solutions. It is often used for smaller biomolecules with exclusion limits up to 10,000 Da.
 
The good mechanical stability of the TOYOPEARL HW-40S resin produces good flow characteristics in large industrial size columns (up to 0.3 MPa). TOYOPEARL HW-40S resin is chemically stable from pH
2-14, and it is this stability that allows a constant packing volume over a wide range of salt concentrations and cleaning in place (CIP) with acid or base. Also, this resin can be run at elevated temperatures (4 - 60 °C) and is autoclavable at 121 °C.

If lower resolution is needed, the TOYOPEARL HW-40F resin can also be used for process SEC. For desalting, where the resin is used in a filtration mode to remove the target from a buffer, TOYOPEARL HW-40EC and TOYOPEARL HW-40C should be used due to their better flow dynamics and lower operating pressures.

 

 
P/NDescriptionResin VolumeParticle Size (µm)   Price
($)
 
0019809TOYOPEARL HW-40S150 mL30  622
0007451TOYOPEARL HW-40S250 mL30  962
0007447TOYOPEARL HW-40S500 mL30  1,431
0014681TOYOPEARL HW-40S1 L30  -
0007967TOYOPEARL HW-40S5 L30  -

          

Product Attributes

Pore size (mean): 5 nm
Exclusion limit: 10,000 Da
Particle size (mean): 30 µm
Shipping buffer: 20% ethanol
pH stability: 2-13
Stability data: 10 years

 

Molar Mass Separation Ranges

Polyethylene glycols
and oxides
100 - 3,000 Da
Dextrans 100 - 7,000 Da
Globular proteins 100 - 1 × 10Da

Structure:

SEC_HWresin_structure.png

 
 

Calibration Curves for Globular Proteins

SEC_HW-40_HW-50_HW55-Fig2_rev.png

Resins: A. TOYOPEARL HW-40
B. TOYOPEARL HW-50
C. TOYOPEARL HW-55
D. TOYOPEARL HW-65
E. TOYOPEARL HW-75
Column size: 22 mm ID × 30 cm
Mobile phase: 0.06 mol/L phosphate buffer, pH 7.0, + 0.06 mol/L KCl
Detection: UV @ 280 nm
Temperature: ambient
Samples: protein standards
Legend: Ve= elution volume
Vc= column volume
 
 
Code #DescriptionLiterature Type
IM02 Instruction Manual for TOYOPEARL and TSKgel PW-type ResinsInstruction Manual
PCAT01 TOYOPEARL, TSKgel and Ca⁺⁺Pure-HA Bulk Resin 2019 Product Guide -- Size Exclusion Product Catalog
RIS0040 TOYOPEARL HW-40Resin Information Sheet
P/NDescriptionPrice ($) 
0019820TOYOPEARL SECPAK HP 1,463